Just made a 3D printed enclosure with fan for my Red Pitaya

Share it with others! So what you are up to do these days?
Post Reply
pvico
Posts: 2
Joined: Sat Jan 02, 2016 11:56 am

Just made a 3D printed enclosure with fan for my Red Pitaya

Post by pvico » Mon Jan 25, 2016 4:27 pm

I just modeled and 3D printed an enclosure for my Red Pitaya.
All the details are here: https://dl.dropboxusercontent.com/u/986 ... losure.pdf
Enjoy !

Nils Roos
Posts: 1441
Joined: Sat Jun 07, 2014 12:49 pm
Location: Königswinter

Re: Just made a 3D printed enclosure with fan for my Red Pit

Post by Nils Roos » Mon Jan 25, 2016 10:22 pm

Good idea to have external screws for the shell and separate screws for the board.

Do you think PLA would break when inserting the nuts ?

Thanks for sharing !
All in a day's work for Bicycle Repair Man

pvico
Posts: 2
Joined: Sat Jan 02, 2016 11:56 am

Re: Just made a 3D printed enclosure with fan for my Red Pit

Post by pvico » Mon Jan 25, 2016 10:56 pm

No, probably not, might just be a bit harder to have the nuts seated correctly. It may also depend on your printer calibration. the hexagonal holes were designed 0.3 mm wider than the actual nut size. I have not used PLA recently and rely almost exclusively on PETG since months

mnikolaos
Posts: 1
Joined: Sat Jan 16, 2016 5:36 pm

Re: Just made a 3D printed enclosure with fan for my Red Pit

Post by mnikolaos » Mon Feb 15, 2016 9:03 am

Hi all,

Excellent work. However and as far as the fan is concerned, do you have any part number of Digikey or Mouser since I haven't manage to find this in local distributors/providers.

Mathias77
Posts: 1
Joined: Thu Nov 16, 2017 7:00 pm

Re: Just made a 3D printed enclosure with fan for my Red Pit

Post by Mathias77 » Thu Nov 16, 2017 7:25 pm

mnikolaos wrote:Hi all,

Excellent work. However and as far as the fan is concerned, do you have any part number of Digikey or Mouser since I haven't manage to find this in local distributors/providers.
Hello Mnikolaos,

If you don't know the part number you can search by a keyword or product name. You can check - https://www.icrfq.com/products/ here I hope you can find theirs by searching a product name which you needed. Thanks.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: amike88 and 1 guest