I'm trying to learn visual programming. My goal is to create a psk31 encoder and decoder for 80m (3.5 MHz), decode and send a test signal.
For transmitting I will have to use a RF amplifier which I will build on a breadboard.
Learning how to use visual programming - psk31 codec
-
- Posts: 1
- Joined: Sun Jun 26, 2016 10:31 am
-
- Posts: 18
- Joined: Tue Sep 06, 2016 7:48 pm
Re: Learning how to use visual programming - psk31 codec
Its a pity to say, but it looks like Red Pitaya board is not suitable for PSK.
This "sine wave" is generating by RP standard generator, was received by another receiver SDRPlay:
Fixed: the issue was in power supply, changing to another one fixed the problem
This "sine wave" is generating by RP standard generator, was received by another receiver SDRPlay:
Fixed: the issue was in power supply, changing to another one fixed the problem
You do not have the required permissions to view the files attached to this post.
Last edited by DVE on Thu Sep 15, 2016 11:17 pm, edited 3 times in total.
-
- Posts: 799
- Joined: Sat May 23, 2015 5:22 pm
Re: Learning how to use visual programming - psk31 codec
Hi DVE,
I've sent you a long e-mail with a couple of ideas about what could be the source of this kind of problem and with some links to other test results.
In short, I'd say that it could be a power supply problem or the output of the Red Pitaya board that is not loaded with 50 Ohm. If it's something else, I'd be very interested to find the source of this problem.
Could you try to generate test signals using the SDR transceiver compatible with HPSDR and PowerSDR mRX PS? As far as I know this combination is known to work (at least with the 0.95 versions of the Red Pitaya ecosystem).
Best regards,
Pavel
I've sent you a long e-mail with a couple of ideas about what could be the source of this kind of problem and with some links to other test results.
In short, I'd say that it could be a power supply problem or the output of the Red Pitaya board that is not loaded with 50 Ohm. If it's something else, I'd be very interested to find the source of this problem.
Could you try to generate test signals using the SDR transceiver compatible with HPSDR and PowerSDR mRX PS? As far as I know this combination is known to work (at least with the 0.95 versions of the Red Pitaya ecosystem).
Best regards,
Pavel
-
- Posts: 799
- Joined: Sat May 23, 2015 5:22 pm
Re: Learning how to use visual programming - psk31 codec
For comparison. Here is a two-tone signal generated by Red Pitaya and received by FLEX-6500:
![Image](http://i2.wp.com/www.pa0aer.com/wp-content/uploads/2015/12/rpimd.jpg)
Test was done by Ger Metselaar (PAØAER). More information about this test can be found at the following link:
http://www.pa0aer.com/projecten/red-pitaya
![Image](http://i2.wp.com/www.pa0aer.com/wp-content/uploads/2015/12/rpimd.jpg)
Test was done by Ger Metselaar (PAØAER). More information about this test can be found at the following link:
http://www.pa0aer.com/projecten/red-pitaya
-
- Posts: 18
- Joined: Tue Sep 06, 2016 7:48 pm
Re: Learning how to use visual programming - psk31 codec
Thanks for your answer.
I used 3 programs as a signal source:
- standard Oscilloscope/Generator web app
- "generate xxxx" command line
- your wspr transmitter
Result is the same, and your gypothesis about power supply seems nice, I'll check it.
I cannot test HPSDR, its not working with my WiFi speed.
At first I was really frustrated with the signal quality, even 8bit HackRF is much better. But maybe its really a power supply issue.
Antenna is ok, it's a magnetic loop, tuned to SWR = 1.5 on this frequency.
I used 3 programs as a signal source:
- standard Oscilloscope/Generator web app
- "generate xxxx" command line
- your wspr transmitter
Result is the same, and your gypothesis about power supply seems nice, I'll check it.
I cannot test HPSDR, its not working with my WiFi speed.
At first I was really frustrated with the signal quality, even 8bit HackRF is much better. But maybe its really a power supply issue.
Antenna is ok, it's a magnetic loop, tuned to SWR = 1.5 on this frequency.
-
- Posts: 18
- Joined: Tue Sep 06, 2016 7:48 pm
Re: Learning how to use visual programming - psk31 codec
Pavel, thanks again, you helps me the 3rd time ![Smile :)](./images/smilies/icon_e_smile.gif)
Problem really was in a power supply, I powered RP from USB, and got a nice spectrum.
I think it would be nice to mention in the description, that standard PR power supply is not suitable for producing radio signals.
![Smile :)](./images/smilies/icon_e_smile.gif)
Problem really was in a power supply, I powered RP from USB, and got a nice spectrum.
I think it would be nice to mention in the description, that standard PR power supply is not suitable for producing radio signals.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 799
- Joined: Sat May 23, 2015 5:22 pm
Re: Learning how to use visual programming - psk31 codec
Good news! I'm glad that transmission is finally working for you.
However, now when we know that this kind of problem is related to the power supply, we should find a way to define what power supplies are OK.
I'm not sure but it still could be that the problem is with the USB of the computer. It could be that when all three radios are powered from the same source, then they ride on the same 50 Hz interference and it cancels out.
So, if I'm not mistaken with the previous statement, then the key test would be when you power all three radios from independent isolated power sources (two computers?).
However, now when we know that this kind of problem is related to the power supply, we should find a way to define what power supplies are OK.
Do you have now all three radios (SDRPlay, HackRF and Red Pitaya) powered via USB from the same computer?I powered RP from USB, and got a nice spectrum.
I'm not sure but it still could be that the problem is with the USB of the computer. It could be that when all three radios are powered from the same source, then they ride on the same 50 Hz interference and it cancels out.
So, if I'm not mistaken with the previous statement, then the key test would be when you power all three radios from independent isolated power sources (two computers?).
Have you tried the lowest sample rate (48000)? In PowerSDR mRX PS, it can be changed via Setup -> Audio -> Sample Rate.I cannot test HPSDR, its not working with my WiFi speed.
-
- Posts: 18
- Joined: Tue Sep 06, 2016 7:48 pm
Re: Learning how to use visual programming - psk31 codec
Yes, I powered all radios from USB, but not at the same time.pavel wrote:Do you have now all three radios (SDRPlay, HackRF and Red Pitaya) powered via USB from the same computer?
Dirty signal was only from standard Red Pitaya power source.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 5 guests