Installing a kernel module

Share it with others! So what you are up to do these days?
Post Reply
Posts: 1
Joined: Sat Jun 21, 2014 3:50 pm

Installing a kernel module

Post by ArtGod » Sat Jun 21, 2014 4:15 pm


I have had to compile and install a custom kernel module, because I picked the wrong wireless card for my RedPitaya.

The other day I had the compiler toolchain up and running in a (32bit) Linux VM. With that I could compile the *.ko file and copy it to the SD card together with the firmware binary. Now I could manually install the module using "modprobe <mymodulePath>" via SSH. A "ifup wlan0" brought up my wireless then.

Now I'd like to make this available at boot time. What I've done is trimming and extracting the root image. Mounting it in my Linux and finally adding the *.ko file to the boot filesystem image under /lib/modules/3.9.0-xilinx/. The firmware went to /lib/firemware/. I also modified /etc/modules to contain my module. After zipping and packing the image with "mkimage" it was ready to boot. However the module is not loaded automatically. In the dmesg output I can see the precompiled module coming up, but not the one I compiled myself. "modprobe"ing the module works as a charm; I don't have to give any path now.

Stuck for today, but happy my Linux knowledge helped me that far.

Happy hacking,

Posts: 2
Joined: Sat Nov 15, 2014 2:41 pm

Re: Installing a kernel module

Post by Wolan32 » Sun Nov 23, 2014 3:00 pm

I'm not too experienced in kernel moduls.
But only idea to add you mode probe command to /etc/init.d/rcS just before bring up the wlan0.
So you should have wifi at boot up.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 1 guest