Digital I/O not work ...

Tell us how your experiment is running with Red Pitaya
Post Reply
accobrasp
Posts: 4
Joined: Thu Jun 04, 2015 2:07 pm

Digital I/O not work ...

Post by accobrasp » Fri Jan 15, 2016 4:23 pm

Hello, I try to manipulate digital input/output of my RP, under Labview.
It works very well with leds, but when I use the DIG IO takes place absolutely nothing.
Did anybody try?

DIO0_N is him well the correct name for the pin 4 of E1?

Thank you

Primoz Perusek
Posts: 5
Joined: Mon Mar 02, 2015 4:20 pm
Location: Ribnica, Slovenia

Re: Digital I/O not work ...

Post by Primoz Perusek » Sun Jan 17, 2016 2:20 pm

Last month the there was an update of the LabVIEW driver for Red Pitaya. If you have an older version, then you should download the new one from the link: http://redpitaya.com/control/?with=labview

If that doesn't solve your problem, then there might be a bug in LV driver

Nils Roos
Posts: 1441
Joined: Sat Jun 07, 2014 12:49 pm
Location: Königswinter

Re: Digital I/O not work ...

Post by Nils Roos » Sun Jan 17, 2016 2:36 pm

It would be helpful to know what you are actually trying to do. Do you try to set a GPIO to 1 and don't observe any change on the pin ?
DIO0_N is him well the correct name for the pin 4 of E1?
Yes.

By default, the GPIOs are set to be inputs. Calling "DIG:PIN DIO0_N,1" without first changing the ports direction to output will fail with an error.

edit: There are inconsistencies between the scpi-server and the documentation regarding GPIOs. See this post for details.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 16 guests