Hi everyone
Does anoyone knows how you get the acquire function running (by using -c 'calibrate') in labview so its directly converted to voltage and not samples. Because i found a program that calculates it by using the amount of bits and then converts it to voltage, but if you use the -c command you automaticaly convert it to voltage.
And another question: Is it possible to upload a .csv file to the red pitaya to generate a signal.Not using the web application 'upload a file' but by using labview.
Any hints on the command line or how i do this, cause i really have no clue about this
Kind Regards
Wouter
Acquire+generate function in labview
-
- Posts: 14
- Joined: Wed Feb 18, 2015 9:58 am
- Location: Merseburg/Diepenbeek
-
- Posts: 34
- Joined: Wed Jun 25, 2014 11:38 pm
Re: Acquire+generate function in labview
Hi Wouter,
First you would need to use the calibration-aware version of acquire that I put together:
viewtopic.php?f=14&t=362
I'm guessing that your LabVIEW code calls plink and acquire via the command line ... you would need to add '-c' to that command line call given to LabVIEW. Then acquire would give you voltages.
Generating a signal from csv file using LabVIEW, I think you would need to modify the generate command line utility to do that.
First you would need to use the calibration-aware version of acquire that I put together:
viewtopic.php?f=14&t=362
I'm guessing that your LabVIEW code calls plink and acquire via the command line ... you would need to add '-c' to that command line call given to LabVIEW. Then acquire would give you voltages.
Generating a signal from csv file using LabVIEW, I think you would need to modify the generate command line utility to do that.
-
- Posts: 14
- Joined: Wed Feb 18, 2015 9:58 am
- Location: Merseburg/Diepenbeek
Re: Acquire+generate function in labview
Hi there
Yes i've used the -c command and that works. Al i have to do now is find a way to plot it with the time, only had 1 semester of basic 'programming' in labview
Any idea how to modifiy the comand line for the generate utlity?
Thanks
Wouter
Yes i've used the -c command and that works. Al i have to do now is find a way to plot it with the time, only had 1 semester of basic 'programming' in labview
Any idea how to modifiy the comand line for the generate utlity?
Thanks
Wouter
-
- Posts: 34
- Joined: Wed Jun 25, 2014 11:38 pm
Re: Acquire+generate function in labview
Wouter,
Are you using the LabVIEW example from Guillaume? If not, then you should google "labview red pitaya" and start from there "Acquire function call from LabView example"
Modifying generate: well, goto wiki.redpitaya.com -> Developer Guide ... and then:
Setting up development environment
Modifying the Red Pitaya tools
Maybe for an initial attempt you might scp the csv file to /tmp and have generate read it from there, don't know what you have in mind.
Are you using the LabVIEW example from Guillaume? If not, then you should google "labview red pitaya" and start from there "Acquire function call from LabView example"
Modifying generate: well, goto wiki.redpitaya.com -> Developer Guide ... and then:
Setting up development environment
Modifying the Red Pitaya tools
Maybe for an initial attempt you might scp the csv file to /tmp and have generate read it from there, don't know what you have in mind.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 5 guests