Problem with data acq on external trigger using labview

divyajanakisagar · Post by **divyajanakisagar** » Fri Apr 01, 2016 11:24 am

Hey,
We have as of now connected the redpitaya using labview ssh (plink). Now, we are trying to acquire signals from channel 1 when an external trigger is given. But we are getting error 56 at the end. what could be the problem? I've also attached the screenshots of the errors that we are getting.

Please help.

Post by **redpitaya** » Wed Apr 06, 2016 12:17 pm

Hi,

You are not using SCPI server?

Best

viseng · Post by **viseng** » Thu May 12, 2016 10:17 pm

HI
I am about to start a labview project using the examples provided as a starting point, but now am uncertain, as I am puzzled by the response "You are not using SCPI server?" What can be made from this? is there an inherent issue with the labview code as highlighted in this thread? Should I be considering SCPI commands via some form of script file instead?

Regards,

viseng

Devious334 · Post by **Devious334** » Mon Jun 27, 2016 9:14 am

start scpi via the guide on repitaya site.
http://redpitaya.com/control/?with=matlab

let me know if ya have more problems

Redpitaya Forum

Problem with data acq on external trigger using labview

Problem with data acq on external trigger using labview

Re: Problem with data acq on external trigger using labview

Re: Problem with data acq on external trigger using labview

Re: Problem with data acq on external trigger using labview

Who is online