Hi everybody,
RedPitaya version 0.96 build 86
When I select an offset value in output 1 or 2 nothing change on display when I link (coax+ 50 ohms term ) IN 0 with OUT 1 or 2.
To be clear no offset possible on the output gen. (the output show trace display the offset)
regards,
No offset possible in the generator function in oscillo PRO
-
- Posts: 1
- Joined: Thu May 21, 2015 7:46 am
- redpitaya
- Site Admin
- Posts: 907
- Joined: Wed Mar 26, 2014 7:04 pm
Re: No offset possible in the generator function in oscillo
Hello,
By default the output amplitude is set to 0.9V.
When you input some offset which is added to that value then
you can go over maximal 1V.
In other words offset+amplitude <= 1V
So, try to set amplitude and offset to 0.4V and check what happens.
Kind regards, RP
By default the output amplitude is set to 0.9V.
When you input some offset which is added to that value then
you can go over maximal 1V.
In other words offset+amplitude <= 1V
So, try to set amplitude and offset to 0.4V and check what happens.
Kind regards, RP
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 84 guests