No offset possible in the generator function in oscillo PRO

[pmchealey]

Hi everybody,
RedPitaya version 0.96 build 86

When I select an offset value in output 1 or 2 nothing change on display when I link (coax+ 50 ohms term ) IN 0 with OUT 1 or 2.
To be clear no offset possible on the output gen. (the output show trace display the offset)

regards,

[redpitaya]

Hello,

By default the output amplitude is set to 0.9V.
When you input some offset which is added to that value then
you can go over maximal 1V.

In other words offset+amplitude <= 1V
So, try to set amplitude and offset to 0.4V and check what happens.

Kind regards, RP