I followed the steps here: http://redpitaya.readthedocs.io/en/late ... ght=github
I got to this step:
Code: Select all
make -f Makefile.x86 install
Code: Select all
Image Name: Linux-4.4.0-xilinx
Created: Tue Jan 10 10:49:08 2017
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4598224 Bytes = 4490.45 kB = 4.39 MB
Load Address: 00008000
Entry Point: 00008000
Image arch/arm/boot/uImage is ready
make[1]: Leaving directory '/install/RedPitaya/tmp/linux-xlnx-branch-redpitaya-v2016.2'
mkdir -p build
cp tmp/linux-xlnx-branch-redpitaya-v2016.2/arch/arm/boot/uImage build
curl -L https://github.com/Xilinx/device-tree-xlnx/archive/xilinx-v2016.2.tar.gz -o /install/RedPitaya/dl/device-tree-xlnx-xilinx-v2016.2.tar.gz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 139 0 139 0 0 225 0 --:--:-- --:--:-- --:--:-- 225
100 58364 0 58364 0 0 43340 0 --:--:-- 0:00:01 --:--:-- 113k
mkdir -p tmp/device-tree-xlnx-xilinx-v2016.2
tar -zxf /install/RedPitaya/dl/device-tree-xlnx-xilinx-v2016.2.tar.gz --strip-components=1 --directory=tmp/device-tree-xlnx-xilinx-v2016.2
make: *** No rule to make target 'fpga.zip', needed by 'build/fpga'. Stop.
user@test-virtualbox:/install/RedPitaya$