Hi,
In hardware I set HV gain. But in software point of view I do not know how to set HV.
I just tried c Example
https://github.com/RedPitaya/RedPitaya/ ... software.c
Here Amplitude is 1.0 v and I am getting the values in terminal -0.2 v to +0.2 v.
I changed parameter of
rp_GenAmp(RP_CH_1, 1.0)
with different values.
So when I tried with 0.4 then value comes between (-0.08 to +0.08)=(0.4/0.08=5)
With 1 it gives (-0.2 to +0.2)=(1/0.2=5)
With 0.7 it gives (-0.14 to +0.14)=(0.7/0.14=5)
So these all situations reading is looking like LV gain.
How can I get real value.
Kind regards,
Vimal Dobariya
HV gain Setting
-
- Posts: 1441
- Joined: Sat Jun 07, 2014 12:49 pm
- Location: Königswinter
Re: HV gain Setting
Hi,
when you set the input jumpers to HV the RP api must be informed of this by calling
when you set the input jumpers to HV the RP api must be informed of this by calling
Code: Select all
rp_AcqSetGain(RP_CH_x, RP_HIGH);
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 80 guests