Hello all,
In the RedPitaya repository, under fpga/prj, there are the following projects: axi4lite classic logic mercury tft v0.94
What are they, and which one corresponds to the current stable release from downloads.redpitaya.com?
There is also fpga/prj/project/redpitaya.xpr but that doesn't seem to work.
Cheers, Dave.
Vivado projects in repository
-
- Posts: 3
- Joined: Fri Feb 16, 2018 11:11 am
Re: Vivado projects in repository
Any answers to this?
-
- Posts: 89
- Joined: Tue Mar 29, 2016 7:41 pm
Re: Vivado projects in repository
The thing is that they are all valid.
Every application loads its own bit image and each image is a result of different project.
If you tell me what is your goal perhaps I can help you.
Every application loads its own bit image and each image is a result of different project.
If you tell me what is your goal perhaps I can help you.
-
- Posts: 3
- Joined: Mon Feb 19, 2018 3:11 am
Re: Vivado projects in repository
So there's a lack of consistency?
-
- Posts: 89
- Joined: Tue Mar 29, 2016 7:41 pm
Re: Vivado projects in repository
No, every application needs a different "hardware" configuration, hence a different image is loaded. That is the beauty of the FPGA it can be reconfigured.
Ok perhaps every is to strong of a word because some do use the same FPGA configuration. However each application does check if the correct FPGA image is loaded and loads the correct one if it has not been loaded before. For example SDR and oscilloscope need different FPGA images.
Ok perhaps every is to strong of a word because some do use the same FPGA configuration. However each application does check if the correct FPGA image is loaded and loads the correct one if it has not been loaded before. For example SDR and oscilloscope need different FPGA images.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 29 guests