Hi,
I'm writing a software application in LabView which will communicate with the red pitaya over internet.
Is it possible to set the firmware in such a way so that it will always boot in SCPI mode?
Thanks,
Nicolaas
Is it possible to boot the RedPitaya with SCPI turned on
-
- Posts: 2
- Joined: Wed Sep 13, 2017 3:08 pm
-
- Posts: 28
- Joined: Fri Apr 28, 2017 12:43 am
Re: Is it possible to boot the RedPitaya with SCPI turned on
Yes.
Via an SSH session (e.g., with PuTTY on Windows), log in to the RP and type the following:
systemctl disable redpitaya_nginx
systemctl enable redpitaya_scpi
and reboot.
Every time the RP boots, the SCPI server will start. The 'nginx' server is the one that is used for the web apps ('scope etc). Only one of the servers can run at the same time.
John.
Via an SSH session (e.g., with PuTTY on Windows), log in to the RP and type the following:
systemctl disable redpitaya_nginx
systemctl enable redpitaya_scpi
and reboot.
Every time the RP boots, the SCPI server will start. The 'nginx' server is the one that is used for the web apps ('scope etc). Only one of the servers can run at the same time.
John.
-
- Posts: 2
- Joined: Wed Sep 13, 2017 3:08 pm
Re: Is it possible to boot the RedPitaya with SCPI turned on
Super!
Thanks!
Thanks!
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: Google [Bot] and 95 guests