how to set host name ip and port for debug in SDK xilinx for redpitaya

Applications, development tools, FPGA, C, WEB
Post Reply
likun
Posts: 1
Joined: Wed Apr 25, 2018 12:21 pm

how to set host name ip and port for debug in SDK xilinx for redpitaya

Post by likun » Wed Apr 25, 2018 12:38 pm

Hello everyone,
I am a beginner with RP.
I would debug the project sdr transceiver using xilinx SDK by ethernet with the red pitaya card but when i enter the ip address of the card (192.168.0.1) and the port 3121 (default), SDK says it can not connect to this address. I tested the debug with the IP of the local machine and it worked well so I do not know whether to install a driver or software to detect the IP of the Red Pitaya?
Thanks for any suggestions.

jmadsenee
Posts: 40
Joined: Fri Apr 17, 2015 7:38 pm
Location: Richmond, VA, USA

Re: how to set host name ip and port for debug in SDK xilinx for redpitaya

Post by jmadsenee » Mon May 07, 2018 6:14 pm

I can't tell you for sure, but when doing remote debugging with the Eclipse IDE I need to start gdbserver on the RP first, before starting debug in the IDE, i.e.:

Code: Select all

root@rp-f00e98:~# gdbserver --attach :2345 `pidof "server"`

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 4 guests