Hi,
I am trying to connect and use LabView 2014 together with Redpitaya. Updated to latest SD image on website and manage to connect via cable (no WLAN connected) and start the scpi-server.
But when I run the example programs I get this error in labview:
Error 63 occurred at TCP Open Connection in RedPitaya.lvlib:Initialize.vi->Interactive LED bar graph.vi
Possible reason(s):
LabVIEW: Serial port receive buffer overflow.
=========================
LabVIEW: The network connection was refused by the server.
Do you have any idea what to do ?
-Øyvind
LabView issues
-
- Posts: 3
- Joined: Wed May 13, 2015 7:38 am
- Location: Germany, Freiburg
Re: LabView issues
Hello Øyvind,
maybe you should have a look on your VI Server Options:
- open a VI
- Tools -> Options -> VI Server
I'm not able to attache a picture. If you need further information about these settings, I can send the picture to you by mail. I'm sorry, I do not have a dropbox account at the moment.
But have a look on machine access (use the IP-address of your RP).
Greetings,
Bruggsel
maybe you should have a look on your VI Server Options:
- open a VI
- Tools -> Options -> VI Server
I'm not able to attache a picture. If you need further information about these settings, I can send the picture to you by mail. I'm sorry, I do not have a dropbox account at the moment.
But have a look on machine access (use the IP-address of your RP).
Greetings,
Bruggsel
-
- Posts: 12
- Joined: Fri Jul 17, 2015 6:43 am
Re: LabView issues
Hi Bruggsel,
I have the same problem, I ticked the TCP/IP option but still popping up the same problem. Any suggestions?
Cheers,
Albert
I have the same problem, I ticked the TCP/IP option but still popping up the same problem. Any suggestions?
Cheers,
Albert
-
- Posts: 3
- Joined: Wed May 13, 2015 7:38 am
- Location: Germany, Freiburg
Re: LabView issues
Hi Albert.
Under the same settings (Tools -> Options -> VI Server) there is the category "Machine Access". There you can add the IP of your RedPitaya. After this step it works fine in my case.
Hope this will help you.
Bruggsel
Under the same settings (Tools -> Options -> VI Server) there is the category "Machine Access". There you can add the IP of your RedPitaya. After this step it works fine in my case.
Hope this will help you.
Bruggsel
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 99 guests