This project was proposed by a group of students from University of Ljubljana.
The initial proposal is located HEREand copied below:
The expected specifications of our instrument are the following:
- 1kHz to 100kHz continous frequency range
5% basic measurement accuracy
the instrument will be able to measure 10 impedance parameters
4terminal connections
automatic parametric frequency sweep
DC bias voltage 0.5V
test frequency accuracy +- 0.02Hz
manual calibration for short/open connections
graphical interface includes results shown in plots and tables
can calculate the average of up to 100 measurements
manual/automatic and smart data acquisition functions
export your data in multiple formats
Ls, Lp 1 mH to 0.1 H
Cs, Cp 1 nF to 100 uF
DF 0.0001 to 100.00
Q 0.00000 to 10000.00
Y, Gp, Bp 10.00 mS to 1 S
|Z|, Rs, Rp, Xs, ESR 100 Ω to 1 MΩ
phase angle -160.00 to +160.00 degrees
DUT AC voltage 20 mV to 1.0 V
DUT AC current 1 mA to 100 mA
DUT DC voltage 20 mV to 1.0 V
DUT DC current 1 mA to 100 mA