Just about everything about Red Pitaya
-
kkeeton6912
- Posts: 9
- Joined: Mon Aug 15, 2016 3:23 pm
Post
by kkeeton6912 » Tue Jan 03, 2017 10:04 pm
I have a few questions about the WSPR app that were not answered elsewhere..
First.. I downloaded the SD-Image and ran the decode wspr but got this error
Code: Select all
Recording ...
Killed write-c2-files(1875) with signal 15
Terminated
Decoding ...
Cannot open data file 'wspr_*_170103_2045.c2'
Second. I pulled the binary files on the WSPR image over to the debian offical memory stick that came with my RP and when I run any of the binary I get a
I assume this is because of the missing dependency on vivadio? but nothing on this page
https://github.com/pavel-demin/red-pita ... issues/213 suggests this.
any assistance with this.. basically I want to get this into some sort of runable code on the official image. but it seems it wont run even on the WSPR-image supplied
-
pavel
- Posts: 799
- Joined: Sat May 23, 2015 5:22 pm
Post
by pavel » Tue Jan 03, 2017 11:18 pm
Code: Select all
Recording ...
Killed write-c2-files(1875) with signal 15
Terminated
Decoding ...
Cannot open data file 'wspr_*_170103_2045.c2'
If this message is shown just for the very first decoding then it's OK. Please try to wait a few minutes for more decodes.
I pulled the binary files on the WSPR image over to the debian offical memory stick that came with my RP and when I run any of the binary I get a bus error
any assistance with this..
You're on your own here. I could only try to help you with my WSPR SD image.
-
kkeeton6912
- Posts: 9
- Joined: Mon Aug 15, 2016 3:23 pm
Post
by kkeeton6912 » Tue Jan 03, 2017 11:52 pm
ahh I understand now .. the process is automatically running in the background via pre-setup chron
/root/decode-wspr.sh >> decode-wspr.log
and the logging output is there not via the shell.
I see it all working now.
-
kkeeton6912
- Posts: 9
- Joined: Mon Aug 15, 2016 3:23 pm
Post
by kkeeton6912 » Wed Jan 04, 2017 9:31 pm
the bus error was the lack of programming on the FPGA
Code: Select all
wget https://www.dropbox.com/sh/5fy49wae6xwxa8a/AACSA6RMQm4OxU5yqfDz8-rHa/sdr/sdr_transceiver_wspr.bit
## use the start and stop scripts or this to run the appications
cat sdr_transceiver_wspr.bit > /dev/xdevcfg
corrected this.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 40 guests