Writing to/Reading from RP registers with SCPI
Posted: Sat Jan 28, 2017 1:41 am
Hey Folks,
As best I can tell, it is impossible to use the standard build's SCPI to write directly to, or read directly from, the FPGA's memory mapped registers-- is this still the case? To be clear: I have generated my own .bit files that repurposes the RP entirely, and I would like to control them remotely. Up to now, I did this with pyRedPitaya, but I'm hoping for a solution which is more easily distributed, as I'd like to make several devices that I've developed available to the public.
In case anyone is interested, the devices I'm planning to share are:
1) a realtime FIR filter with 30000 taps and latency of 2.5uS
2) a 2 channel scriptable triggerable DDS
3) a single channel scriptable triggerable multichromatic DDS which can simultaneously put out up to 20 frequencies
Cheers,
Jon
As best I can tell, it is impossible to use the standard build's SCPI to write directly to, or read directly from, the FPGA's memory mapped registers-- is this still the case? To be clear: I have generated my own .bit files that repurposes the RP entirely, and I would like to control them remotely. Up to now, I did this with pyRedPitaya, but I'm hoping for a solution which is more easily distributed, as I'd like to make several devices that I've developed available to the public.
In case anyone is interested, the devices I'm planning to share are:
1) a realtime FIR filter with 30000 taps and latency of 2.5uS
2) a 2 channel scriptable triggerable DDS
3) a single channel scriptable triggerable multichromatic DDS which can simultaneously put out up to 20 frequencies
Cheers,
Jon