RP and LabVIEW triggering problem

Just about everything about Red Pitaya
Post Reply
scju
Posts: 4
Joined: Tue Apr 18, 2017 9:34 am

RP and LabVIEW triggering problem

Post by scju » Tue May 02, 2017 1:36 pm

Hello Guys,

I currently want to write a Program that triggers at a predefined Voltage threshold. The Problem is, that the trigger configuration doesn't seem to work, also the Trigger mode seams to be without function. I also tried to "directly configure" the RP program by sending SCPI commands, but that also wasn't very helpful. Somebody's a clue how to configurator the trigger values ?
Or has somebody some example VI how to proper use the Trigger ?

Greetings,
Julian

User avatar
redpitaya
Site Admin
Posts: 883
Joined: Wed Mar 26, 2014 7:04 pm

Re: RP and LabVIEW triggering problem

Post by redpitaya » Mon May 08, 2017 11:11 am

Hi,

have you checked this link
http://redpitaya.readthedocs.io/en/late ... ml#labview
http://redpitaya.readthedocs.io/en/late ... -exm1.html [scroll down]

Also, trigger level is set in volts.

Best, Zumy

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 24 guests