Hello Guys,
I currently want to write a Program that triggers at a predefined Voltage threshold. The Problem is, that the trigger configuration doesn't seem to work, also the Trigger mode seams to be without function. I also tried to "directly configure" the RP program by sending SCPI commands, but that also wasn't very helpful. Somebody's a clue how to configurator the trigger values ?
Or has somebody some example VI how to proper use the Trigger ?
Greetings,
Julian
RP and LabVIEW triggering problem
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: RP and LabVIEW triggering problem
Hi,
have you checked this link
http://redpitaya.readthedocs.io/en/late ... ml#labview
http://redpitaya.readthedocs.io/en/late ... -exm1.html [scroll down]
Also, trigger level is set in volts.
Best, Zumy
have you checked this link
http://redpitaya.readthedocs.io/en/late ... ml#labview
http://redpitaya.readthedocs.io/en/late ... -exm1.html [scroll down]
Also, trigger level is set in volts.
Best, Zumy
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 115 guests