Re: Running Eco 2.22 and 2.23
Posted: Tue Feb 13, 2024 3:05 pm
Hello RP,
I made a SD card with 2.00-236 and flashed an the 2.04 Linux image. (But in fact my Balena is not capable to flash it, there is always a message of formatting first, which cannot be done. So I used the WIN32diskimager instead, which worked fine.)
All the apps are working so far, even with the WiFi dongle. The first few tries to get to the marketplace are not going okay, there was a message -- I don't know, but this is the case quite often. But finally I was able to re-install all the apps. And then I made the manual calibration to factory state, and as far as I tested apps there was no problem.
On the right lower corner there was an exclamation mark flashing, and there was a hint to start the update routine. But to be honest, I don't want to update too often, if there is everything okay up to now.
Congratulations, this seems to be working quite well!
Best regards
Dieter
I made a SD card with 2.00-236 and flashed an the 2.04 Linux image. (But in fact my Balena is not capable to flash it, there is always a message of formatting first, which cannot be done. So I used the WIN32diskimager instead, which worked fine.)
All the apps are working so far, even with the WiFi dongle. The first few tries to get to the marketplace are not going okay, there was a message -- I don't know, but this is the case quite often. But finally I was able to re-install all the apps. And then I made the manual calibration to factory state, and as far as I tested apps there was no problem.
On the right lower corner there was an exclamation mark flashing, and there was a hint to start the update routine. But to be honest, I don't want to update too often, if there is everything okay up to now.
Congratulations, this seems to be working quite well!
Best regards
Dieter