Connection problem to my Redpitaya

[pgame]

Hello,

I am trying to set up my redpitaya but it is failing. I tried to connect it to my router, but failed when trying to open the url http://rp-f00a60.local/ in my browser. In the second step, I connected it directly to my computer, assigned a static IP 192.168.0.1 for the computer and again it failed when I tried to access the IP http://192.168.0.15/ in the browser.

Unfortunately, I couldn't see any further steps I can take to fix the problem. Any help would be greatly appreciated.

Setup:
Redpitaya is powered by a 3A USB power supply with an original SD card
Green LED is ON
Ethernet cable is connected directly to my computer

[pgame]

I have followed also the FAQ
https://redpitaya.readthedocs.io/en/lat ... leshooting

and flashed an another SD-card with the OS. Nethertheless the same beviour takes place. Only the green LED is turned ON, all others are OFF.

So far it seems that the board is not working due to SD-card problems. Very sad, as the board has never been used and is in a new condition, but the warranty is expired

[redpitaya]

Hello pgame,

Thank you for writing on the forum.

Do not worry, we will try to solve this problem. As you already figured out, this looks like an SD/OS installation problem.

Please check the following:

• If any of the pins on the SD card reader are bent outwards causing a loss in contact (push them back into place)

• Check whether the power is plugged into the correct micro-USB port (the outer one is labelled PWR on the bottom silkscreen, and the inner one is for the serial console)

• Please use the recommended Balena Etcher software to flash the SD card

• Which Red Pitaya OS have you installed on the board? If it is 2.00 and the board previously had 1.04, please check this issue on GitHub: https://github.com/RedPitaya/RedPitaya/issues/250

Please let me know the results. If you have any pictures, please post them through a 3rd party page like IMGUR and post the link here or send them to support@redpitaya.com.