Hello folks !
I have an RP for a few days, with an alu case. All goes well but I would be interested by the extension board. My question is : does this extension board can be mount on the RP outside the alu case ? Is the length of connectors good enough to connect this board to the RP with an alu case in place ? Thanks a lot for your responses ! Sincerely, Vince
Is the extension board is compatible with an alu case ?
-
- Posts: 1
- Joined: Sat Aug 20, 2016 1:11 pm
-
- Posts: 3
- Joined: Wed Aug 31, 2016 12:57 am
Re: Is the extension board is compatible with an alu case ?
Also interested in knowing if this works...RP gets quite hot and would like the heatsinking ability
-
- Posts: 5
- Joined: Mon Oct 05, 2015 9:44 pm
Re: Is the extension board is compatible with an alu case ?
Hey,
yes, the sensor extension module is compatible with the ALU case. As for the heatsink....the ALU case works fine also as a heatsink. It has much larger surface than the original heatsink so it dissipates more heat.
Best regards,
Red Pitaya Team
yes, the sensor extension module is compatible with the ALU case. As for the heatsink....the ALU case works fine also as a heatsink. It has much larger surface than the original heatsink so it dissipates more heat.
Best regards,
Red Pitaya Team
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 32 guests