Hi,
I have two RPs running in a synchronized fashion as in [1]. The master RP gets its clock from the ADC crystal and forwards it via the daisy chain connector to a slave RP. I need to acquire two signals on both master and slave from the high speed ADCs. For a synchronized aquisition, I need to replace the ADC crystal clock on the slave RP with my synchronized clock. I found [2], stating that for an ADC clock directly coming from the FPGA I need to move R25,R26 to location R27,R28. Before heating the soldering iron, I would like to check with you guys if this is correct. Plus, I need a hint which constraints have to be changed and what should be changed in the block diagram.
Cheers
Jonas
[1] https://www.koheron.com/blog/2016/11/29 ... ya-cluster
[2] https://redpitaya.readthedocs.io/en/lat ... xtADC.html
Use external clock for ADC
-
- Posts: 17
- Joined: Tue Jul 12, 2016 10:34 am
Re: Use external clock for ADC
Did nobody try to use a different ADC clock yet? I would really appreciate some input!
Thanks in advance
Jonas
Thanks in advance
Jonas
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 78 guests