Hello guys i am new here so i need a help...i bought the Redpitaya ultimate and try to measure a 1k resistor as DUT with the LCR meter app, but it doesn't work. I followed the description and connected IN1(redpitaya) to IN1 (module), IN2 to IN2 and both jumpers were set to HV. Whats wrong with my redpitaya? Just an example what i measured:
MIN: -4449,9 Ohm
MAX:2820,5 Ohm
AVG:-1935,5 Ohm
It should be 1000 Ohm. Seems like the value are random...
Thanks for your helping guys!
Best regards uemlue
LCR Meter
-
- Posts: 7
- Joined: Mon Sep 25, 2017 7:12 pm
Re: LCR Meter
Hello,
is the out1 (redpitaya) conected to the out1 (module) too?
I think that the impedance meter analyser application is better and have more options.
but this one have annother problem that i will post it soon.
is the out1 (redpitaya) conected to the out1 (module) too?
I think that the impedance meter analyser application is better and have more options.
but this one have annother problem that i will post it soon.
-
- Posts: 1
- Joined: Fri Jan 19, 2018 3:36 pm
Re: LCR Meter
hi,
are you sure the jumpers are well configured ?
jb
are you sure the jumpers are well configured ?
jb
-
- Posts: 7
- Joined: Mon Sep 25, 2017 7:12 pm
Re: LCR Meter
I think that jumpers would be both in HV or both in LV. but for the position at the middle that was shown here :
http://redpitaya.readthedocs.io/en/late ... e-analyzer
don't give me good results.
if we don't use the LCR meter extension card we must have the R_shunt that mutch with the measurment.
http://redpitaya.readthedocs.io/en/late ... e-analyzer
don't give me good results.
if we don't use the LCR meter extension card we must have the R_shunt that mutch with the measurment.
-
- Posts: 12
- Joined: Mon Feb 13, 2017 10:18 am
Re: LCR Meter
Hi!
When I use the LCR meter application with the LCR extension board, and using the center jumper connection (basically as shown in http://redpitaya.readthedocs.io/en/late ... lcr-module), I sometimes get that kind of behaviour, and I think it might have been due to the SMA connections being a bit loose.
So if you are doing that setup (it wasnt clear for me what you where trying to say in the previous post), I would suggest double checking your SMA cables.
When I use the LCR meter application with the LCR extension board, and using the center jumper connection (basically as shown in http://redpitaya.readthedocs.io/en/late ... lcr-module), I sometimes get that kind of behaviour, and I think it might have been due to the SMA connections being a bit loose.
So if you are doing that setup (it wasnt clear for me what you where trying to say in the previous post), I would suggest double checking your SMA cables.
-
- Posts: 1
- Joined: Fri Mar 02, 2018 2:29 pm
Re: LCR Meter
I have checked the SMA connectors, and put the jumper in the middle (as on the image), but I still get random values displayed. Also, the LCR is still in Demo mode (I have no idea where to enter the code I have received)? Tried using Firefox and Chrome
- redpitaya
- Site Admin
- Posts: 904
- Joined: Wed Mar 26, 2014 7:04 pm
No more demo mode
Thank you for posting.
Newer builds do not require a license. Since release 0.97 all applications are unlocked by default. Users don’t need to register or apply unlock keys anymore.
To benefit from the new software environment you just need to update the OS image on your SD card.
Here is a step by step tutorial: https://redpitaya.readthedocs.io/en/lat ... Dcard.html
Just one warning, please backup first your content or maybe use another SD card for this, as there is one option missing, the visual programming part. This was removed also because less than 1% of customers was using it and we were paying unnecessary licence fees for it.
Newer builds do not require a license. Since release 0.97 all applications are unlocked by default. Users don’t need to register or apply unlock keys anymore.
To benefit from the new software environment you just need to update the OS image on your SD card.
Here is a step by step tutorial: https://redpitaya.readthedocs.io/en/lat ... Dcard.html
Just one warning, please backup first your content or maybe use another SD card for this, as there is one option missing, the visual programming part. This was removed also because less than 1% of customers was using it and we were paying unnecessary licence fees for it.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 66 guests