Where's Red_Pitaya_Schematics_v1.0.1.pdf ?

[marceluda]

It's mentioned in http://wiki.redpitaya.com/index.php?tit ... e#Hardware
Hardware Specifications ver. 1.1 and Hardware Specifications ver. 1.0 links in the wiki, but can't find it anywhere...

[drey]

I'd like to second this question.

[positron]

It will almost certainly never be released. Original backers have been asking since release day, but it's really the only way they can continue to make money.

This is not a fully "open source" project, as they say, simply because of this one remaining issue.

If they did release the schematics, the Chinese would have a copy within a month or two up on Ebay for much less than 500 Euros....

That being said, I'm mostly happy with RP and trying to program it.

[shirleymarquez]

Red Pitaya is no longer a 500 euro board. It's only 200 euros now from the official store, and about the same from Elektor. I doubt that a Red Pitaya clone could be a lot cheaper; there are some expensive chips on the board, including the Zynq SoC and the A/D and D/A converters.

[dirk009]

I just got my board. I assumed, that I could get all documentration for that. Now, I must find out that the project ist not open source like Raspberry. So it may be better to return the board for refund before the two weeks are over.

[greggdaug]

Any updates to this?

Reference to Red_Pitaya_Schematics_v1.0.1.pdf is again mentioned in the new Red_Pitaya_HW_Specs_V1.1.1.pdf document.

[redpitaya]

Hi,

Regarding the schematics question check the FAQ under Hardware section
or here

All Best, RP