### Physical system modelling

Discussions about active development projects

### Physical system modelling

#137 by DashPi
Mon Jun 30, 2014 7:29 pm
I recently developed a new app. (LTI) for physical system modeling from a set of coefficients. I'm already working on some variants with embedded system design tools and have in mind porting it to FPGA. Any suggestions regarding the FPGA implementation?

### Re: Physical system modelling

#138 by DashPi
Mon Jun 30, 2014 7:44 pm
Here is how the app. looks like:

### Re: Physical system modelling

#140 by DashPi
Tue Jul 01, 2014 10:56 am
Here's the example of the harmonic oscillator modelling and step response:

### Re: Physical system modelling

#173 by Crt Valentincic
Wed Jul 02, 2014 4:32 pm
Nice work!

### Re: Physical system modelling

#428 by fisafisa
Wed Jul 16, 2014 10:36 pm
What about a state space model?
X(t+1) = A X(t) + B U(t)
Y(t+1) = C X(t) + D U(t)

U and Y are 2 value vectors
X is n values (let's say 20)
A is square matrix describing system dynamics
B and D are 2 * 20 matrices
C is 20 * 2 matrices

With this model you can describe any (limited to X size dynamic order) 2x2 linear system

Nice work!

### Re: Physical system modelling

#434 by DashPi
Thu Jul 17, 2014 5:13 pm
Thanks Črt and fisafisa.

The state space is certainly an option. Any DSP code can be simply added to the file
https://github.com/dashpi/RedPitaya/blo ... fpga_lti.c
from line 367 on and compiled.
Arrays cha_state, chb_state or other arrays can be used to register the state X, while the arrays
cha_dsp_par, chb_dsp_par can be used to pass the system parameters ABCD.

In SS you can even extend the app. to a 2x2 MIMO by using both inputs and outputs.

I think with SS is more convenient to pass the matrixes through files.

### Re: Physical system modelling

#452 by bingoiceono
Wed Jul 23, 2014 9:22 am
This is a great app.
I have one question. When I set a0 and b0 to 1 and others be 0. Is there must be some gain on the signal? The output I got is about 2 times than the input

### Re: Physical system modelling

#456 by Rudolf
Wed Jul 23, 2014 8:26 pm
Great app!
@bingoiceono: On my Redpitaya it works fine even with your filter settings. The signals have equal amplitudes. I'm using one of the Redpitaya outputs to generate the input signal + "generate" command. How are you feeding your Redpitaya input?

### Re: Physical system modelling

#481 by bingoiceono
Mon Jul 28, 2014 3:26 am
I use an external signal generator and oscilloscope to test it. Signal generator outputs signal to the RP's input port and the oscilloscope. The programmed RP signal is also connected to the same oscilloscope.

### Re: Physical system modelling

#518 by DashPi
Thu Jul 31, 2014 2:36 pm
bingoiceono, have you checked impedance settings of oscilloscope inputs and signal generator (50 ohm / HIZ)? Sometimes wrong impedance selection may produce voltage drops.

### Who is online

Users browsing this forum: No registered users and 3 guests

### About Us

Read more about Red pitaya on our website redpitaya.com