Placement, modules, components and accessories; the ones that exist and the the nice-to-be's
-
jmadsenee
- Posts: 47
- Joined: Fri Apr 17, 2015 7:38 pm
- Location: Richmond, VA, USA
Post
by jmadsenee » Fri Sep 20, 2019 8:23 pm
Just to confirm from my earlier post, the PAU05 dongle still seems to be working without a problem; I've powered up/down probably a dozen times. Just to be clear, I'll explain how I get the wireless AP set up. As I said above, I do not use the web setup/network manager.
- I image the uSD card with the latest stable build (in this case Version 0.98, Build 694).
- I copy my hostpad.conf file (see below) to the root directory of the 124MB partition.
- I insert the card into the RP and power up.
- I open a terminal window and copy my interfaces file (see below) into the /etc/network directory:
Code: Select all
scp /home/john/Projects/DAQ_RedP/interfaces root@rp:/etc/network/interfaces
I'm not sure that the
interfaces file needs to be copied; it seems to work without it, but everything I found on the web talked about having it....
John
My
hostapd.conf file:
Code: Select all
interface=wlan0
ssid=potato
driver=nl80211
hw_mode=g
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
My
interfaces file:
Code: Select all
auto wlan0
iface wlan0 inet static
address 192.168.128.1/24
netmask 255.255.255.0
-
November_SSN
- Posts: 4
- Joined: Thu Sep 26, 2019 3:56 pm
Post
by November_SSN » Fri Sep 27, 2019 5:00 pm
So, is that recurring issue solved, or is there a quick way to fix it? Because one of the reasons I'm looking at Red Pitaya would be to work with a couple meteorological instruments at one of
these houses for sale in Alicante, since I plan to use it to keep the pool and plants in shape even when I'm away thanks to a home automation system.
Last edited by
November_SSN on Sun Oct 13, 2019 7:02 pm, edited 1 time in total.
-
Peterh61
- Posts: 4
- Joined: Mon Apr 24, 2017 1:26 pm
Post
by Peterh61 » Sun Oct 13, 2019 2:35 pm
Hello John,
thank you very much for the hints.
I'll try to get the PAU05, but
Amazon -> dont't ship to Austria
eBay -> sold out.
However, I will get it or compatible, even if I had to travel to Panda in San Jose, fixing this s... problem finally
BR Peter
-
Peterh61
- Posts: 4
- Joined: Mon Apr 24, 2017 1:26 pm
Post
by Peterh61 » Mon Oct 28, 2019 11:37 am
Hello,
I have to report success
I bought the PAU06 from US Amazon and followed the instructions of John.
Now it works as aspected. According to the data-sheet of the PAU06 it has the same RT5372 chipset inside, this was the precondition I think.
Once again, many thanks to John!
Greetings from Austria
Peter
-
jmadsenee
- Posts: 47
- Joined: Fri Apr 17, 2015 7:38 pm
- Location: Richmond, VA, USA
Post
by jmadsenee » Thu Nov 21, 2019 10:49 pm
One more thing I've learned:
I started having problems - my WiFi would disappear, then it would be back. To make a long story short, after wasting an enormous amount of time believing it was a configuration problem, I figured out that my 5V supply was putting out about 4.85V, and that would disable the WiFi. I don't know if the RP shut off power to the dongle, or the dongle disabled itself, but since I've adjusted my supply to put out 5.0V, I have not had any more issues. I am still using the configuration I posted above.
I wonder if this may have been happening to @
hvanmunster@gmail.com when he started this thread...
John
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: Google [Bot] and 8 guests