Connection of external ADC clock
-
- Posts: 27
- Joined: Thu Apr 14, 2016 3:14 pm
Connection of external ADC clock
I think the drawing showing the positions of the R23, 24, 27, 28 resistors on the bottom of the RP board (see here) is not quite accurate, at least not for the board that I have got (V1.1). In particular, I believe the redpitaya logo is not next to the six sockets where the resistors can be placed. Comparing the drawing to the layout of my board, I think the sockets are about one centimetre to the left of the fixing plug of the heatsink. Could someone confirm this?
-
- Posts: 1441
- Joined: Sat Jun 07, 2014 12:49 pm
- Location: Königswinter
Re: Connection of external ADC clock
Yes, the position of the RedPitaya logo has changed on the bottom silkscreen between 1.0 and 1.1.
The 6 pads 1cm ZYNQ-wards from the heatsink mounting hole are indeed for R23,24,27,28 .
The 6 pads 1cm ZYNQ-wards from the heatsink mounting hole are indeed for R23,24,27,28 .
-
- Posts: 2
- Joined: Mon Sep 11, 2017 3:32 pm
Re: Connection of external ADC clock
Could you please specify which is which. I am particularly interested about the location of R27 and R28. Thank you.Nils Roos wrote:Yes, the position of the RedPitaya logo has changed on the bottom silkscreen between 1.0 and 1.1.
The 6 pads 1cm ZYNQ-wards from the heatsink mounting hole are indeed for R23,24,27,28 .
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 1 guest