Page 1 of 1

Audio Measurement Project

Posted: Thu Dec 06, 2018 1:25 pm
by eduardomaranicaetano
Hello to everbody here in the Forum, I'm new here and this is my first post.
As a Audio Engineer, I work and develop professional audio equipment for musicians and recording facilities.
The red Pitaya, as far as I know, is a wornderfull and powerfull tool for measurements, but it's lack on the audio measurements.
I'd like to know if there is anyone who want to join me in a project to create a audio measument plattaform.
It would include:
Distortion, THD+N, Intermodulation Distortion, CMRR, SNR, Input Noise, Dynamic Range, Crosstalk, Input and Output level before a distortion paramter that could be setted, Gain and so on.
It could work together with an analog board controlled by the RedPitaya.
This analog board would have the precision differential amplifiers, switched resistors for autoscale, Weighting filter (maybe it could be done digitally), optional input impedance...
A important thing would be the possibility to change the mean number on the spectrum analyzer so we could reduce te noise floor.
I do have another ideia for a THD measument. Since all the methods that exist involve a static analyses, I think that our project should include a dynamic distortion analyses (more on that later) as well as a Slew Rate measument.
I could contribute with the external analogue board development/design and some enlightenment on the measurements necessity, but i need someone for the digital part.
Anyone wana join this project?
Fill free to contact me on my email: eduardomaranicaetano@gmail.com
My best regards.
Eduardo Caetano

Re: Audio Measurement Project

Posted: Wed Oct 30, 2019 1:54 pm
by redpitaya
Hello,
This "sounds" very interesting. We need to investigate what is feasible, we can do it after the 250SDR will be released in a month or so.

Re: Audio Measurement Project

Posted: Wed Oct 30, 2019 8:06 pm
by eduardomaranicaetano
Ok. Lets wait for its release.
By the way, do someone lnows hot to change the spectrum analyser scale from linear to log?