Page 1 of 1

Typo in Docs - Sample Lenght

Posted: Thu Feb 13, 2020 9:39 am
by MrCJ
Aloha,
it's me again!
And I believe if found another typo / miscalculation that threw me off quite a bit.
The typo is the same table (section 2.4.4.4.1.1.) as in the previous post.
This time it seems like the samle length for a sampling rate (SR) of 7.6kS/s the duration is supposedly 8.590 s.
Calculating the sample lenght with the formula below, gives me a duration of 2.155 s however.
samples / SR = 16384/ 7600 kHz = 2.155 s

Or am I missing something?


Thanks for your attention.

Re: Typo in Docs - Sample Lenght

Posted: Tue Mar 03, 2020 3:51 pm
by redpitaya
Thank you for posting. We are taking a look into this.

Re: Typo in Docs - Sample Lenght

Posted: Wed Mar 04, 2020 4:29 pm
by redpitaya
Sampling rate is wrong: 7.6 kS/s -> should be 1.9kS/s