Infrared Remote Control Decoder & Switcher Board

Just about everything about everything else
Forum rules
Be nice to others.
Post Reply
sam.mo
Posts: 8
Joined: Fri Jan 08, 2021 6:40 pm

Infrared Remote Control Decoder & Switcher Board

Post by sam.mo » Wed Jun 02, 2021 10:18 pm

Infrared remote controllers are everywhere around us. The majority of home appliances are controlled using infrared remote controls. In this article/video, we learn to build a device that can decode (almost) any IR remote control and use the instructions to switch the relays (loads). So we can use this feature in a variety of applications without buying a new IR remote control and expensive hardware, such as turning ON/OFF the lights, opening/closing the curtains, ... etc. I have used an ATTiny85 microcontroller as the heart of the circuit. The device can record up to three IR codes in the EEPROM memory and switch 3 separate devices. Each relay can handle the currents up to 10A. The load switching mechanism (momentary ON/OFF, toggling, .. etc) can be programmed by the user.

I used Altium Designer 21.4.1 and the SamacSys component libraries (SamacSys Altium Plugin) to design the Schematic and PCB. I also used the Siglent SDS2102X Plus/SDS1104X-E to analyze the IR signals.

The device works stable and reacts well to the transmitted IR signals. So let’s get started and build this puppy!

I recommend redpitaya team to include the IR decoding package in the oscilloscope as IR is widely used in a variety of controlling applications.

YouTube: https://youtu.be/rpQ0OEZ6NcY

Image

Image

User avatar
redpitaya
Site Admin
Posts: 568
Joined: Wed Mar 26, 2014 7:04 pm

Re: Infrared Remote Control Decoder & Switcher Board

Post by redpitaya » Wed Nov 24, 2021 10:22 am

Black Friday 2021 is here!

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 1 guest