Acquiring example: TriggerLevel

[dires]

Hi everybody,

I have another question about an example code.

I used the C-code from the following example (Link) and at first it worked fine.

But it seems that even though I changed the TriggerLevel much higher than the signal, it still triggered and printed the acquired points.

I changed the line "rp_AcqSetTriggerLevel();".

The TriggerLevel was set to 1V and the signal (sinus) was set to 0.3V.

What might be the problem here or did I miss something?

Thanks in advance.

[redpitaya]

Hi,

It shouldn't trigger in this case.
Check the trigger source.

Best, RP