Calibration with scopgenpro stucks at HV calibration

Applications, development tools, FPGA, C, WEB
Post Reply
Posts: 22
Joined: Tue May 12, 2015 6:50 pm
Location: CH-Zuerich

Calibration with scopgenpro stucks at HV calibration

Post by gbhardy » Fri Aug 05, 2016 8:33 pm

I tried to calibrate my RP with the "CALIBRATION" function within scopgenpro (OS version 0.95 and 0.96).
Calibrating the LV section went well.
But after clicking "Calibrate" on the step "DC offset for HV", nothing happens any more. Only "Cancel" works.
As you see in the attached screen shot, this is the state where it stucks. Additionally the "Demo mode" message appears.

I read the contents of the E2prom after the LV calibration and after the attempt of the HV calibration as 512 Bytes of binary data, if that helps:

Calibration data after complete LV calibration: ... V_complete

Calibration data after the try of HV DC offset calibration: ... offset_try

Kindly regards,

Posts: 1
Joined: Tue Oct 18, 2016 11:07 am

Re: Calibration with scopgenpro stucks at HV calibration

Post by cosimo » Fri Oct 28, 2016 10:57 am

I have the same problem....
Not help from staff ?


User avatar
Site Admin
Posts: 382
Joined: Wed Mar 26, 2014 7:04 pm

No more demo mode!

Post by redpitaya » Fri Dec 20, 2019 9:31 am

Thank you for posting.
Newer builds do not require a license. Since release 0.97 all applications are unlocked by default. Users don’t need to register or apply unlock keys anymore.

To benefit from the new software environment you just need to update the OS image on your SD card.
Here is a step by step tutorial: ... Dcard.html
Just one warning, please backup first your content or maybe use another SD card for this, as there is one option missing, the visual programming part. This was removed also because less than 1% of customers was using it and we were paying unnecessary licence fees for it.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 3 guests