Redpitaya Forum

I'm trying to programm via C++. My plan was to use the SCPI commands and send them via TCP to the RP. In order to build a socket I use the SFML Library. Now I got some problems with my Project:

• When I start the SCPI Server on my Browser, it shows an different IP-Address then the one I used to connect to my RP. Which one is now the right own for the SCPI commands?

• Do I just need to send the SCPI commands to the RP or is there any other step necessary? At the moment I open a TCP connection and use the rp.h Headerfile to access the commands. I store the in an packet and sent them. Is anything wrong with this methode.

I've read several times now that the communication with SCPI commands can become realy tricky so I wanted to take a look at the visual programming. But everytime I want to start the Server vor Visual Programming, the website freezes and nothing happens. I've already update the OS but this didn't change anything.
Thanks for your help in advance

Hi,
you are right, you should see the same IP address for connecting to RP and reported after starting the server.
Is your RP behind a router or other networking device? How are you connected to it?

By the way, I hope you know that it is not possible to run SCPI commands/programs in parallel with web applications.

Also, until next time, did you researched this page: https://redpitaya.readthedocs.io/en/lat ... I%20Server

Or, also this developers guide for serial commands: https://redpitaya.readthedocs.io/en/lat ... I%20Server

Did you try to start the server manually? from cli https://redpitaya.readthedocs.io/en/lat ... r-manually