Page 1 of 1

AWG loading CSV file doesn't work

Posted: Thu Feb 14, 2019 10:17 pm
by HD13
I am using this one;
Generator & Oscilloscope (0.94-400)
And want to load a CSV file whit an arbitrary waveform.
When I do this I get the message "wrong file type"
Is there an example wich does work ?
Or which are the mandatory setting on those CSV files?

Re: AWG loading CSV file doesn't work

Posted: Wed Dec 04, 2019 12:53 pm
by redpitaya
You can try to save the CVS to see the formatting from the green icon scope app.

here is header example:
TIME ms IN1 IN2
5 -0.016113 -0.000854
4.99 -0.015991 -0.000854
4.98 -0.015991 -0.000732
4.971 -0.016113 -0.000977
4.961 -0.016113 -0.000854
4.951 -0.015991 -0.000732
4.941 -0.015991 -0.000854
4.932 -0.016113 -0.000854
4.922 -0.015991 -0.000854
4.912 -0.015991 -0.000732
4.902 -0.015991 -0.000854
4.893 -0.016113 -0.000854
4.883 -0.015991 -0.000732
4.873 -0.015991 -0.000732
4.863 -0.015991 -0.000732
4.854 -0.016113 -0.000854
4.844 -0.015991 -0.000732
4.834 -0.015991 -0.000732
4.824 -0.015991 -0.000732
4.814 -0.016113 -0.000977
4.805 -0.015991 -0.000854
4.795 -0.015991 -0.00061
4.785 -0.015991 -0.000854
4.775 -0.016113 -0.000977
4.766 -0.015991 -0.000854