Zynq7020 Overclock to 866 MHz

Applications, development tools, FPGA, C, WEB
Post Reply
User avatar
renegade264
Posts: 15
Joined: Mon Apr 08, 2019 1:08 pm

Zynq7020 Overclock to 866 MHz

Post by renegade264 » Sat Mar 28, 2020 6:01 pm

Hi,

I have the Red Pitaya 122.88 SDR model and I have seen in other places (marketing) that the Zynq 7020 is capable of operating at 866 MHz and I was wondering if it is possible for the Red Pitaya to operate at this speed? I have had a look around in Vivado and I have tried changing a few clock frequencies to increase the rate past 666 MHz but it does not allow it.

Also is the DDR clock capable of stably going higher than 533 MHz, the prescaler resolution of the PLL's would likely limit how fine you can control the clock, but I am curious if anyone has tried this or has successfully fiddled around with the clock frequencies ?

Best Regards, Renegade

F4HTB
Posts: 8
Joined: Tue Jul 04, 2017 10:46 am

Re: Zynq7020 Overclock to 866 MHz

Post by F4HTB » Mon Mar 21, 2022 1:58 pm

Hello Renegade,

Have you find some answer?

Best, Olivier

juretrn
Posts: 104
Joined: Tue Nov 16, 2021 11:38 am

Re: Zynq7020 Overclock to 866 MHz

Post by juretrn » Tue Mar 22, 2022 9:34 am

Are you looking to increase the DDR frequency?
In that case, I believe you are out of luck. The RAM chip is 1066 MHz DDR.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 19 guests