Hi All,
I'm reading RF input signal using rp_AcqGetDataV function on a 125-14 board.
It's working, based on the C code here:
https://redpitaya.readthedocs.io/en/lat ... exm1.html.
However, on the Scope application, and on an external scope, the voltage is much different.
For example, when injecting 2v peak-to-peak, the output sine from a generator, rp_AcqGetDataV reading show 40mV peak-to-peak.
Please note that the board is calibrated, and IN1 channel is set to HV.
What am I missing?
Thanks in advance,
Omer
RF Input vs Scope Voltage Level
-
- Posts: 9
- Joined: Tue Mar 16, 2021 4:53 pm
Re: RF Input vs Scope Voltage Level
Bumping this post. Hopefully @red pitaya will reply.
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: RF Input vs Scope Voltage Level
Is the issue still manifesting after you manually
update the Red Pitaya OS to the latest BETA OS by using this guide:
https://www.youtube.com/watch?v=Qq_YRv2nk3c
?
update the Red Pitaya OS to the latest BETA OS by using this guide:
https://www.youtube.com/watch?v=Qq_YRv2nk3c
?
-
- Posts: 21
- Joined: Mon Jan 27, 2020 1:10 pm
Re: RF Input vs Scope Voltage Level
Unfortunately yes
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 96 guests