i'm started to develop a windows oscilloscope in c#.
But on test-laptop, i've tried to capture ignition from my car over wlan(rp access point modus).
But the best signal i get is very worse.
Current setup is:
Start streaming app on rp and the rest of the work makes the laptop.
Picture is from Dev-machine, 12v pwm signal
Fault one:
Voltage-values from streaming has a size of 4byte, but my rp has only 10bit.
Todo(for testing): reduce the network traffic to 1/4 to cut the voltage value to 8bit.
Maybe fault two:
Currently i use windows for operation like trigger..., maybe it's better to let RP to do the job?
But this is bad for recording.
For drawing i use Oxyplot.
Datasaving works with displaying prev, next frames.
Currently i redraw after i've added all points for a filled chart.
For testing:
"Point (complete)" should be lower than 1000 for faster drawing.
So here is the problem:
I've not enougth time to develop a half year for a working server-client-application.
If one or more want's develop on the programm here is the source code.
And don't forget to release the new versions
https://ksd-systems.de/Oscilloscope.zip