Unable to make stream_app

Applications, development tools, FPGA, C, WEB
Post Reply
tinyhippo
Posts: 6
Joined: Sun Oct 10, 2021 6:37 pm

Unable to make stream_app

Post by tinyhippo » Sun Oct 10, 2021 6:57 pm

Hello,

I am sorry if my problem is obvious to solve but I am very new to red pitaya world. When I try to make a project, for example stream_app, I run the following command:

Code: Select all

make PRJ=stream_app
into Redpiyaya/fpga/folder my synthesis via vivado is working fine but then I encounter the following error:

Code: Select all

make PRJ=stream_app
hsi    -nolog -nojournal -mode batch -source red_pitaya_hsi_dts.tcl -tclargs stream_app

****** hsi v2019.1 (64-bit)
  **** SW Build 2552052 on Fri May 24 14:47:09 MDT 2019
    ** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.

source red_pitaya_hsi_dts.tcl
# cd prj/$::argv
# set path_sdk sdk
# open_hw_design $path_sdk/red_pitaya.sysdef
INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
# set_repo_path ../../../tmp/device-tree-xlnx-xilinx-v2017.2/
ERROR: [Hsi 55-1550] Repository Directory ../../../tmp/device-tree-xlnx-xilinx-v2017.2/ doesn't exist in the disk
ERROR: [Common 17-39] 'set_repo_path' failed due to earlier errors.
INFO: [Common 17-206] Exiting hsi at Sun Oct 10 19:33:21 2021...
make: *** [Makefile:59 : prj/stream_app/sdk/dts/system.dts] Erreur 1
The problem therefore happens when running the red_pitaya_hsi_dts.tcl file. I do not really get why the path is set in a relative way here ?
Moreover, did I miss some optional installation with vivado if device-tree-xlnx-xilinx-v2017.2 is not on my computer ? (I run an extensive search on my hard drive)
Finally, should I put the files on my redpitaya on run the compilation from there ?
Thanks in advance :)

User avatar
redpitaya
Site Admin
Posts: 568
Joined: Wed Mar 26, 2014 7:04 pm

Re: Unable to make stream_app

Post by redpitaya » Mon Nov 08, 2021 8:56 am

Thank you for your post. Our developers are looking into this and we will reply as soon as they have some more details.

juretrn
Posts: 1
Joined: Tue Nov 16, 2021 11:38 am

Re: Unable to make stream_app

Post by juretrn » Tue Nov 16, 2021 12:21 pm

Makefile.x86 should be able to get the devicetree source (.tar) from Xilinx's github repo and unpack it by running make -f Makefile.x86 devicetree .
The expected path to file is https://github.com/Xilinx/device-tree-x ... .2.tar.gz/

if all else fails, run

curl -L https://github.com/Xilinx/device-tree-x ... .2.tar.gz/ -o device-tree-xlnx-xilinx-v2017.2.tar.gz

and extract the .tar.gz to /[redpitaya path]/tmp/device-tree-xlnx-xilinx-v2017.2

tinyhippo
Posts: 6
Joined: Sun Oct 10, 2021 6:37 pm

Re: Unable to make stream_app

Post by tinyhippo » Thu Nov 18, 2021 2:55 pm

I will try, thank you very much

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 2 guests