Slow ADC not working
Posted: Mon Sep 05, 2022 10:52 am
Hi all,
I'm trying to read a voltage on the slow ADC through the extension connector, the setup is exactly as described in https://redpitaya.readthedocs.io/en/lat ... -exm1.html.
I'm using a STEMlab 125-14 with OS v 1.04 build 18 and the standard API.
When I try to read the slow ADC using rp_ApinGetValueRaw(pin, &value); the result is still 0 no matter of which PIN number is selected. I checked using the multimeter that the input voltage on the pin is 1.5 V.
Can someone help me to figure out why?
Thanks!
Alessio
I'm trying to read a voltage on the slow ADC through the extension connector, the setup is exactly as described in https://redpitaya.readthedocs.io/en/lat ... -exm1.html.
I'm using a STEMlab 125-14 with OS v 1.04 build 18 and the standard API.
When I try to read the slow ADC using rp_ApinGetValueRaw(pin, &value); the result is still 0 no matter of which PIN number is selected. I checked using the multimeter that the input voltage on the pin is 1.5 V.
Can someone help me to figure out why?
Thanks!
Alessio