Unit conversion for cnt in PID+oscilloscope app

Applications, development tools, FPGA, C, WEB
Post Reply
Hellesse
Posts: 2
Joined: Fri May 12, 2023 2:52 pm

Unit conversion for cnt in PID+oscilloscope app

Post by Hellesse » Fri May 12, 2023 3:09 pm

Hi everybody,

I am a new RedPitaya user and I would like to use the the board as a PID filter. I have never done any FPGA, so I am basically just using the WEB interface. In the interface, all the units (for the Set Point and all the PID's gains) are in cnt but I don't get what does it represent (for example in volts for the set point).

If somebody could tell me, it would be super cool !

User avatar
redpitaya
Site Admin
Posts: 880
Joined: Wed Mar 26, 2014 7:04 pm

Re: Unit conversion for cnt in PID+oscilloscope app

Post by redpitaya » Tue May 16, 2023 11:02 am

Hello Hellesse,

Which application are you using? Is it the Lock-In +PID?

If so, here is a link with more details:
https://marceluda.github.io/rp_lock-in_pid/

Hellesse
Posts: 2
Joined: Fri May 12, 2023 2:52 pm

Re: Unit conversion for cnt in PID+oscilloscope app

Post by Hellesse » Wed May 17, 2023 8:51 am

Hi,

I am using the PID Controller & Oscilloscope application. I don't the lock-in + PID.

User avatar
redpitaya
Site Admin
Posts: 880
Joined: Wed Mar 26, 2014 7:04 pm

Re: Unit conversion for cnt in PID+oscilloscope app

Post by redpitaya » Mon May 22, 2023 2:13 pm

Here is a link with the application details:
https://sites.bu.edu/biomicroscopy/file ... or-AIM.pdf

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 25 guests