122-16 & SkimmerServer

[Yutaka Aoki]

Hi,I recived a new 122-16 thanks.
And tried to set it up to running with SkimmerServer, but failed.

PC:windows10 corei7 RAM 8GB
RedPitaya OS 1.04-11
I installed SDR receiver compatible with HPSDR and clicked to run.

I placed Hermesintf.dll in the folder of Skimmerserver,
and renamed to Hermesintf_xxxx.dll with last 4 characters
of 122-16 MAC address.

Now when I start SkimmerServer,
In the SDR Receiver column of SkimmerServer,
"SDR Failure: Can't locate HP SDR device"
comes up and it doesn't work.

I need your kind help.
Thanks in advance.

Yutaka

[pavel]

Please follow the instructions at the following link:

http://pavel-demin.github.io/red-pitaya ... ng-started

[Yutaka Aoki]

Hi,Pavel
Thanks for your quick replay.
I'll follow your instructions.

I have one question, is os 1.04-11 not suitable for skimmerserver?

Yutaka

[pavel]

I have one question, is os 1.04-11 not suitable for skimmerserver?

I do not know. I have never tried it and I do not have instructions for this OS.

[Yutaka Aoki]

ok,Pavel.
I 'll try this weekend.
Yutaka

[Yutaka Aoki]

Hi Pavel,

According to "Getting started"
I downloaded
red-pitaya-alpine-3.14-armv7-20220322.zip
and unzipped.

Should I copy the apps folder and others
in the unzipped folder to the SD card simply?
Do I need to make an image file?

Sorry for the elementary question.

Yutaka

[pavel]

Just copy all files and directories from the zip file to an empty micro SD card.

The getting started instructions are known to work with a freshly unpacked factory formatted (single partition, FAT32 file system) micro SD card.

You can find more information about the SD card at the following link:

http://pavel-demin.github.io/red-pitaya-notes/alpine/

There is a Troubleshooting section at the bottom of the linked webpage with answers to some frequently asked questions.

[Yutaka Aoki]

Finally 122-16 woke up and was able to connect to skimmerserver.
It was important to use freshly unpacked factory formatted micro SD card.

Thanks Pavel.

Yutaka

[Yutaka Aoki]

122-16 PC direct conection & SkimSrv

I changed the IP address of PC to 192.168.1.111.,
before I connect 122-16 to PC directly with LAN cable.
HPSDR work fine, but Skimmer Server can't locate
HP SDR device.

Is there any solutions? or this type of connection is
impossible?

Any feedback is welcome.
Thanks in advance.


Yutaka