I am trying to establish a serial console to my STEMlab 125-14 and follow these instructions. I install the Virtual COM port driver from FTDI Chip. Installation finished with a window telling that two driver packages are Ready to use. However, I do not see any new COM port drivers appearing in Device Manager.
Has anybody installed the FTDI Chip virtual COM port driver recently with success ?
My system:
HP ZBook Fury 15.6 inch G8 Mobile Workstation PC
Windows 10 Enterprise, 10.0.19045
FTDI driver does not create new COM port
-
- Posts: 10
- Joined: Wed Dec 14, 2022 11:38 am
Re: FTDI driver does not create new COM port
hmm, did not succeed in attaching picture.
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: FTDI driver does not create new COM port
Hello abregnsbo,
Thank you for writing to the forum.
On Windows, we suggest Windows Subsystem for Linux to establish a socket connection. If you have a better way to achieve it, please feel free to share the information with the community:
https://redpitaya.readthedocs.io/en/lat ... ware-setup
Please note that an additional cable is required to connect the serial console to the computer using the second micro USB port on STEMlab 125-14. The installation of the FTDI driver worked without issues (one of my setups is Windows 10 Education version 22H2 19045.3448). Though I did install the driver a while ago.
I would suggest establishing a serial console connection with a standard board before trying the board with the hardware modification.
Thank you for writing to the forum.
On Windows, we suggest Windows Subsystem for Linux to establish a socket connection. If you have a better way to achieve it, please feel free to share the information with the community:
https://redpitaya.readthedocs.io/en/lat ... ware-setup
Please note that an additional cable is required to connect the serial console to the computer using the second micro USB port on STEMlab 125-14. The installation of the FTDI driver worked without issues (one of my setups is Windows 10 Education version 22H2 19045.3448). Though I did install the driver a while ago.
I would suggest establishing a serial console connection with a standard board before trying the board with the hardware modification.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 83 guests