FPGA programming under Windows

Nitram · Post by **Nitram** » Tue Aug 19, 2014 4:20 pm

Hi,

I'm new to the red pitaya, but a bit familiar with FPGA programming. What is the easiest way to program the red pitaya with Xiliny Vivado under Windows. I just want to have a LED shining. I tried a bin bitstream and copied it to the SD card, but with no success.

Thanks,
Martin

Nils Roos · Post by **Nils Roos** » Tue Aug 19, 2014 9:52 pm

Hi Martin,
the easiest way is to use a JTAG adapter.
If you want to do it without additional hardware, you'd need to build a boot.bin file for the µSD, containing a first stage boot loader and your bitstream, and possibly also the u-boot binary.

Nitram · Post by **Nitram** » Thu Aug 21, 2014 11:59 am

Hi,
How can i create the boot.bin under Windows?

Crt Valentincic · Post by **Crt Valentincic** » Thu Aug 28, 2014 5:54 pm

One of the great Zynq features is also the possibility to reprogram FPGA directly from running OS (Linux) using cat command
as it is described here: http://wiki.redpitaya.com/index.php?tit ... nvironment

Redpitaya Forum

FPGA programming under Windows

FPGA programming under Windows

Re: FPGA programming under Windows

Re: FPGA programming under Windows

Re: FPGA programming under Windows

Who is online