Dear all,
I'm currently dealing with the red pitaya RF inputs and I found something confusing inside the documentation. I've bought the device from RS components and on their web site two pdf are available:
- "Red Pitaya User manual" which reports a full scale voltage of +/-1V or +/-20V (jumper configurable)
- "Red Pitaya Hardware Specification V1.1.1" which reports a full scale voltage of 2Vpp or 46Vpp (jumper configurable)
Which is the real limit for the higher configuration? +/-20V (40Vpp) or 46Vpp?
Thanks in advance.
ADC Full scale Voltage
-
- Posts: 34
- Joined: Wed Jun 25, 2014 11:38 pm
Re: ADC Full scale Voltage
46V must be a typo ... 40V would be correct
-
- Posts: 5
- Joined: Mon Dec 15, 2014 3:53 pm
Re: ADC Full scale Voltage
Thanks!edgo wrote:46V must be a typo ... 40V would be correct
-
- Posts: 1
- Joined: Wed Mar 18, 2015 6:31 pm
Re: ADC Full scale Voltage
Regarding this thread:
whats the max input voltage and scaling (V/div) with a x10 test probe.
thanks!
whats the max input voltage and scaling (V/div) with a x10 test probe.
thanks!
-
- Posts: 1441
- Joined: Sat Jun 07, 2014 12:49 pm
- Location: Königswinter
Re: ADC Full scale Voltage
With a 10x attenuating probe and HV jumper settings you have a measuring range of +/- 200V.
The scope app's maximum V/div with these settings is 100V/div .
The scope app's maximum V/div with these settings is 100V/div .
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 55 guests