Adding DC offset for PID controller
Posted: Tue Sep 01, 2015 12:56 pm
Hi all,
I'm adding a DC offset feature to the PID controller for the experiment I'm doing. I have edited the index.html, several C controller code, and red_pitaya_pid.v and red_pitaya_pid_block.v code and I have uploaded them in the following link.
https://www.dropbox.com/sh/ehll7mkexasu ... SoZHa?dl=0
However, I would expect that as I turn on the PID controller and turn the DC offset up while keeping all other parameters zero, it would output a constant voltage, but it didn't. If someone could take a quick look, and tell me what I did wrong, I would greatly appreciate it.
Thanks!
I'm adding a DC offset feature to the PID controller for the experiment I'm doing. I have edited the index.html, several C controller code, and red_pitaya_pid.v and red_pitaya_pid_block.v code and I have uploaded them in the following link.
https://www.dropbox.com/sh/ehll7mkexasu ... SoZHa?dl=0
However, I would expect that as I turn on the PID controller and turn the DC offset up while keeping all other parameters zero, it would output a constant voltage, but it didn't. If someone could take a quick look, and tell me what I did wrong, I would greatly appreciate it.
Thanks!