Page 1 of 2
Error when attempting to make project in Ubuntu
Posted: Tue Apr 11, 2023 8:56 pm
by sslerose
I am currently following the instructions
here under 3.2.2.3.4 and I keep getting the following error both in Ubuntu and in the Vivado TCL console:
Code: Select all
sslerose@Sams-PC:~/RedPitaya/fpga$ make project PRJ=v0.94 MODEL=Z10
make: *** No rule to make target 'project'. Stop.
I have already completed the build process for the Red Pitaya ecosystem found
here, using the automatic build scripts in the /RedPitaya/build_scripts folder (this is all under 3.2.2.4.2). My source and PATH variable are set correctly and done automatically in my bashrc file.
Also, if I try to run
Code: Select all
sudo make -f Makefile.x86 devicetree MODEL=Z10
I get a long string of actions that are littered with
Warning (avoid_default_addr_size) and
fatal: destination path '.' already exists and is not an empty directory.
I am not using the most recent OS or
GitHub repository as I started my project before the Red Pitaya team began their update. Any advice would be greatly appreciated.
Re: Error when attempting to make project in Ubuntu
Posted: Thu Apr 13, 2023 9:54 am
by juretrn
Hi,
a while back we have moved the FPGA files to a separate repository:
https://github.com/RedPitaya/RedPitaya-FPGA
you can run
make project ... from the root directory of that. I believe the automated scripts checkout the FPGA repo and then build it.
Re: Error when attempting to make project in Ubuntu
Posted: Tue Apr 25, 2023 7:59 pm
by sslerose
juretrn,
This worked thank you. However, when I ran the synthesis, implementation, and bitstream generation for the sample project it gives (making the 0th led blink), I run into an "Abnormal program termination" with the following full error:
Code: Select all
Abnormal program termination (11)
Please check '/home/sslerose/RedPitaya-FPGA/prj/v0.94/hs_err_pid3444.log' for details
segfault in /opt/Xilinx/Vivado/2020.1/bin/unwrapped/lnx64.o/vivado -exec vivado -source red_pitaya_vivado_project_Z10.tcl -tclargs v0.94 , exiting...
make: *** [Makefile:47: project] Error 139
The error log is as follows:
Code: Select all
#
# An unexpected error has occurred (11)
#
Stack:
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(+0xb6aadb) [0x7fe6b2f6aadb]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(JVM_handle_linux_signal+0xbb) [0x7fe6b2f6fe1b]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(+0xb647b8) [0x7fe6b2f647b8]
/lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7fe70b21a520]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(+0x47f79) [0x7fe68e047f79]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(+0x485b2) [0x7fe68e0485b2]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(Java_sun_awt_X11_XRobotPeer_getRGBPixelsImpl+0x30d) [0x7fe68e038fdd]
[0x7fe69ad2591e]
Any advice on fixing this issue would be much appreciated!
Re: Error when attempting to make project in Ubuntu
Posted: Wed Apr 26, 2023 7:37 am
by juretrn
Hi,
please check if your PC has run out of memory during build. Small FPGA designs like RP need somewhere in the range of 4 GB RAM.
Otherwise, Vivado just might fail on its own, it would not be unheard of.
Re: Error when attempting to make project in Ubuntu
Posted: Mon May 15, 2023 4:07 pm
by sslerose
Apologies for the late reply,
I have 32GB RAM on my Win10 machine with 16GB dedicated to WSL2.
If Vivado is failing on its own, then it's always dying with the same error: the string of issues with jre9.0.4. I do not have any version of Java installed on Ubuntu, but these errors are occurring within the Vivado files under /opt/, so do I need to install jre9.0.4?
Thank you in advance.
Re: Error when attempting to make project in Ubuntu
Posted: Tue May 16, 2023 7:52 am
by juretrn
You shouldn't have to install JRE, it must be included in the Vivado installation.
Check if you have installed the following packages:
Code: Select all
libncurses5 libtinfo5 libncurses5-dev libncursesw5-dev
If installing these doesn't help, then I suggest to download and install Vivado again.
Re: Error when attempting to make project in Ubuntu
Posted: Tue May 16, 2023 4:49 pm
by sslerose
After sending the reply I found that even when Vivado crashed, it would still generate a .bit file that I could send to my Red Pitaya and it performed as expected. This is at least the case for the
1.3.2 Project.
I performed the
simple LED blinker FPGA lesson and the first extension, and it finished without any errors, so I am not quite sure what happened.
I installed the packages you mentioned, and the errors remained the same, again only for the 1.3.2 project. I am attempted more of the FPGA walkthrough projects and will see if I have any issues with those.
Re: Error when attempting to make project in Ubuntu
Posted: Fri May 19, 2023 5:34 pm
by sslerose
Small update.
I have found that if Vivado crashes when generating the bitstream, I can simply reopen the project and it will resume the generation successfully. Still not exactly sure what is happening, but at the very least there is a temporary solution.
Re: Error when attempting to make project in Ubuntu
Posted: Tue Oct 24, 2023 2:55 pm
by TheGeri
sslerose wrote: ↑Tue Apr 25, 2023 7:59 pm
juretrn,
This worked thank you. However, when I ran the synthesis, implementation, and bitstream generation for the sample project it gives (making the 0th led blink), I run into an "Abnormal program termination" with the following full error:
Code: Select all
Abnormal program termination (11)
Please check '/home/sslerose/RedPitaya-FPGA/prj/v0.94/hs_err_pid3444.log' for details
segfault in /opt/Xilinx/Vivado/2020.1/bin/unwrapped/lnx64.o/vivado -exec vivado -source red_pitaya_vivado_project_Z10.tcl -tclargs v0.94 , exiting...
make: *** [Makefile:47: project] Error 139
The error log is as follows:
Code: Select all
#
# An unexpected error has occurred (11)
#
Stack:
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(+0xb6aadb) [0x7fe6b2f6aadb]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(JVM_handle_linux_signal+0xbb) [0x7fe6b2f6fe1b]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib//server/libjvm.so(+0xb647b8) [0x7fe6b2f647b8]
/lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7fe70b21a520]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(+0x47f79) [0x7fe68e047f79]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(+0x485b2) [0x7fe68e0485b2]
/opt/Xilinx/Vivado/2020.1/tps/lnx64/jre9.0.4/lib/libawt_xawt.so(Java_sun_awt_X11_XRobotPeer_getRGBPixelsImpl+0x30d) [0x7fe68e038fdd]
[0x7fe69ad2591e]
Any advice on fixing this issue would be much appreciated!
Good afternoon,
I am reopening this post because I have the same error. Were you able to fix it? I really appreciate any kind of help or advice. Thanks you in advance!
Re: Error when attempting to make project in Ubuntu
Posted: Thu Oct 26, 2023 3:30 pm
by sslerose
TheGeri wrote: ↑Tue Oct 24, 2023 2:55 pm
I am reopening this post because I have the same error. Were you able to fix it? I really appreciate any kind of help or advice. Thanks you in advance!
Geri,
I never found a true solution to avoiding the crash and errors, I always just relaunched Vivado with
and then opened the project I was working on. The bitstream should still write without issues.
If you eventually move on to creating your own projects that are based on the general ZYNQ7000 architecture, then you can upgrade to Vivado 2023. I haven't ran into this error using said version.
It is likely possible to utilize Red Pitaya's build scripts and everything using 2023, as I wouldn't imagine the TCL commands not working anymore. However, I do not have a definitive answer on that specifically.