Slow analog output DAC low voltage

Just about everything about Red Pitaya
Post Reply
davide.cryptalabs
Posts: 1
Joined: Thu Mar 31, 2022 4:06 pm

Slow analog output DAC low voltage

Post by davide.cryptalabs » Thu Mar 31, 2022 4:15 pm

I'm using the C API to set the analog output AO0 to 1.8V.
The API (rp_AOpinSetValue(0,1.8)) returns true but the output is actually 1.1V.
When I try to set a lower voltage: 0.9V on the output i get ~0.6V.
I've measured the AO0 pin with an oscilloscope.

Has anyone exeperienced this, in the documentation is clearly amrked that I can set it up to 1.8V.
Thanks
Top
Kilroy
Posts: 28
Joined: Thu Feb 19, 2015 11:03 am
Location: Moenchengladbach, Germany
Contact:
Contact Kilroy

Re: Slow analog output DAC low voltage

Post by Kilroy » Tue Aug 02, 2022 11:14 am

Yes - same here.
But I am not using the latest FPGA nor the latest API.
I have seen there are have been made some changes and I will try to figure that out.
Top
juretrn
Posts: 16
Joined: Tue Nov 16, 2021 11:38 am

Re: Slow analog output DAC low voltage

Post by juretrn » Tue Aug 02, 2022 2:37 pm

I believe this was fixed in the latest release. We transitioned from PWM to PDM generation in the FPGA for these outputs, but we missed a parameter fix in the software.
But the latest release should now work correctly IIRC.
Top
Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Return to “General discussions”

Who is online

Users browsing this forum: No registered users and 2 guests