STEM122-16sdr oscilloscope and generator do not work
-
- Posts: 1
- Joined: Wed Aug 21, 2019 4:32 am
STEM122-16sdr oscilloscope and generator do not work
STEM122-16sdr oscilloscope and generator do not work, I tried the oscilloscope app and the Jupiter notebook. No lock either way. However, using Jupiter notebook I can control LEDs and the slow analog outputs. I have manually downloaded the OS and installed it on a SD card, so the firmware should be up-to-date.
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: STEM122-16sdr oscilloscope and generator do not work
Hi,
We had an OS update since your post, is your issue persistent also with the newest version?
We had an OS update since your post, is your issue persistent also with the newest version?
-
- Posts: 2
- Joined: Wed Nov 04, 2020 11:41 am
Re: STEM122-16sdr oscilloscope and generator do not work
Hello everyone,
I have the same problem.
I tried OS images:
1. SDRlab_122-16_OS_1.03-6_stable
2. SDRlab_122-16_OS_1.04-7_beta
3. SDRlab_122-16_OS_1.04-8_beta
I have attached below the image of web GUI and results that I'm getting on in1 connector.
I have tried any combination (OUT1 -> IN1 , OUT2 -> IN1, OUT1->IN2 and OUT2->IN2), and always get the same result. Also I have tried to connect OUT1 to Tektronix oscilloscope and all I'm getting is rubbish instead of 1kHz 1Vpp sinusoid.
Can someone explain me results from attached image.
I have connected original adapter and ethernet cable and also used sd card that all came from the box: STEM lab. The version of my board is STEM122-16SDRV1r1.
Has anyone experienced the similar problem ?
Any workaround ?
I have the same problem.
I tried OS images:
1. SDRlab_122-16_OS_1.03-6_stable
2. SDRlab_122-16_OS_1.04-7_beta
3. SDRlab_122-16_OS_1.04-8_beta
I have attached below the image of web GUI and results that I'm getting on in1 connector.
I have tried any combination (OUT1 -> IN1 , OUT2 -> IN1, OUT1->IN2 and OUT2->IN2), and always get the same result. Also I have tried to connect OUT1 to Tektronix oscilloscope and all I'm getting is rubbish instead of 1kHz 1Vpp sinusoid.
Can someone explain me results from attached image.
I have connected original adapter and ethernet cable and also used sd card that all came from the box: STEM lab. The version of my board is STEM122-16SDRV1r1.
Has anyone experienced the similar problem ?
Any workaround ?
-
- Posts: 2
- Joined: Wed Nov 04, 2020 11:41 am
Re: STEM122-16sdr oscilloscope and generator do not work
I have some problems to attach the image.
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: STEM122-16sdr oscilloscope and generator do not work
Although this issue has been fixed with the new releases, there is the chance that ad blockers can also cause troubles: Guy is not loading , just showing the circles;
This happens is if you have adblock enabled in your browser.
You can disable it for the Red Pitaya unit and it will work fine. Recommended browser is an up to date google chrome.
This happens is if you have adblock enabled in your browser.
You can disable it for the Red Pitaya unit and it will work fine. Recommended browser is an up to date google chrome.
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: STEM122-16sdr oscilloscope and generator do not work
Black Friday 2020 is here!
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 44 guests