Page 1 of 1
how to get wifi client mode with Pavel software.
Posted: Sat Aug 24, 2019 2:36 pm
by pa0slt
Hi,
I am new with the redpitaya.
I use the software of Pavel Demin for Whisper 8 channel tranceiver.
To operate it , the RedPitaya must be in client mode. But it is default in hotspot mode.
I can not find how to change the hotspot mode to client mode.
So how can i do this... and how can i anyhow give some linux command whith his software sd-card.
thanks
Wim PA0SLT
Re: how to get wifi client mode with Pavel software.
Posted: Sat Aug 24, 2019 3:02 pm
by pavel
The instructions are already in my notes at
this link.
Re: how to get wifi client mode with Pavel software.
Posted: Sat Aug 24, 2019 7:57 pm
by pa0slt
Hi Pavel,
very nice you anwere my questions!
i am very new with the RedPitaya.
I did what is in the link above, but it is not working.
I have a sd-card with your software on it... with an ethernet connection tot my Local network it
works perfect for 8 channels.
i use putty ssh for giving commands to the RedPitaya.
This command does nothing: wpa_passphrase SSID PASSPHRASE > /etc/wpa_supplicant/wpa_supplicant.conf
( it gives no responce)
after that i give: ./wifi/client.sh
then i get some cryptic message and the connection is closed...
so i can not give this command: lbu commit -d
So what do i do wrong...
Wim PA0SLT
Re: how to get wifi client mode with Pavel software.
Posted: Sat Aug 24, 2019 9:09 pm
by pa0slt
Sorry Pavel,
how stupid..... i have to change the word SSID in the ssid of my network and idem for
the password.......
so disregard this messages....
again sorry
i think it wilL work now
73
Wim PA0SLT
Re: how to get wifi client mode with Pavel software.
Posted: Fri Sep 06, 2019 8:00 am
by Warren
who invented the cell phone